Sntp Client - SMC Networks 6724AL2 Management Manual

sntp client

Use this command to enable SNTP client requests for time
synchronization from NTP or SNTP time servers specified with the sntp
servers command. Use the no form of this command to disable SNTP
client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates
and times for log events. Without SNTP, the switch only records the
time starting from the factory default set at the last bootup (i.e.,
00:00:00, Jan. 1, 2001).
• This command enables client time requests to time servers specified via
the sntp servers command. It issues time synchronization requests
based on the interval set via the sntp poll command.
Example
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#end
Console#show sntp
Current time:
Poll interval: 60
Current
Console#
Related Commands
sntp server (3-56)
sntp poll (3-57)
show sntp (3-58)
Dec 23 02:52:44 2003
mode: unicast
SNTP C
OMMANDS
3-55