Generating A Radio Details Report - 3Com WX1200 Reference Manual

Generating a Radio
Details Report
7 To select or change the output directory for the report, click Choose,
navigate to the new directory, and click Select.
8 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
9 Click Generate.
10 When the report is generated, click the report link to view it.
The RF summary report contains the following sections:
Cumulative data for the scope of the report
Detailed data for each WX switch within the scope of the report
The radio details report lists details about an individual radio.
The data for this report comes from 3WXM Services. The Enable RF
trending option, located in the RF Monitor group box of the Monitoring
Settings tab, must be enabled. (See "Changing Monitoring Settings" on
page 503.)
1 Select the Reports tool bar option.
2 In the Report Category list, select RF Reports.
3 In the Reports list, select Radio Details.
4 Select the radio for which you want the report.
The scope is always MAP Radio and cannot be changed.
5 Select the time period for the report:
1 Hour
24 Hours
7 Days
30 Days
6 To select or change the output directory for the report, click Choose,
navigate to the new directory, and click Select.
7 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.

Generating a Radio Details Report

397