Configuring Snmp Basic Functions - 3Com 4200G 12-Port Configuration Manual

4200g series switch
Hide thumbs Also See for 4200G 12-Port:
Table of Contents

Advertisement

Configuring SNMP
Basic Functions
Table 248 Common MIBs (Continued)
MIB attribute
MIB content
Private MIB
DHCP MIB
DHCP MIB
QACL MIB
ADBM MIB
IGMP Snooping MIB
RSTP MIB
VLAN MIB
Device management
Interface management
QACL MIB
ADBM MIB
RSTP MIB
VLAN MIB
Device management
Interface management
The configuration of SNMP V3 configuration is different from that of SNMP V1 and
SNMP V2C, therefore SNMP basic function configurations for different versions are
introduced respectively. For specific configurations, refer to Table 249 and Table 250.
Table 249 Configure SNMP basic functions for SNMP V1 and SNMP V2C
Operation
Enter system view
Enable SNMP Agent
Set system information

Configuring SNMP Basic Functions 279

References
Command
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }* |
all } }
Description
Optional
By default, SNMP Agent is
disabled.
To enable SNMP Agent,
you can execute this
command or those
commands used to
configure SNMP Agent
features.
Required
By default, the contact
information for system
maintenance is "R&D
Beijing, 3Com", the
system location is "Beijing
China", and the SNMP
version is SNMP V3.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents