Data Exchange Method
3-1-5
Exchanging Data with the User Link Table
60
When monitoring data, select the Display option.
3. Use the Contact Distributor (Block Model 201) to read data to each internal
switch's bit.
4. Use Monitor Plus to specify the Internal Switch's tags for Monitor Plus and
read Internal Switch's bit data through the CPU Unit's data area.
5. The bit data will monitored.
The user link table can be used to read/write data in the CPU Unit's memory.
The CPU Unit's memory data areas can be read/written from Monitor Plus by
setting tags in this user link table.
Loop Control Board
Function block data
Virtual link
table block
Tag A
Tag C
Select Display.
CPU Unit
I/O memory
Write
Wr (LCB→)
Tag A
User link table
Tag A
Tag B
Tag B
Write
Tag C
Wr (LCB→)
Read
Tag C
Rd (→LCB)
Section 3-1
Monitor Plus
Specify the tags
and read/write.