Setting For Stopping Alarm Sound - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

System Information Settings

5-6-10 Setting for Stopping Alarm Sound

Alarm Reset Settings
Note
These settings specify whether or not an alarm sound will be produced when
alarms are reset. There are separate settings for process alarms and system
alarms.
• Process Alarms
An alarm message is displayed in the Alarm Log Screen.
• System Alarms
An alarm message is displayed in the System Monitor Screen.
Enable process alarm sounds
to produce a sound when an
alarm message is displayed in
the Alarm Log Screen.
Both alarms are disabled by default.
When the alarm sound is disabled, no sound will be produced when the alarm
is reset, but the alarm event will remain in the alarm log.
Section 5-6
Enable system alarm sounds
to produce a sound when an
alarm message is displayed in
the System Monitor Screen.
219