Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 115

Trend Screens
1,2,3...
100
(3) Detailed Settings
When the tag name is set above, the upper/lower limits of the specified
tag will be displayed by default. The setting can be changed.
(4) Delete
Deletes the selected pen.
Note (a) When the Delete Button is pressed in step 4, above, all tag infor-
mation will be deleted from the Trend Screen, including the graph-
ic display for the pen.
(b) After the four items above are set and the OK Button is clicked,
some time will be required before the results are displayed on the
Trend Screen. This time will be the collection cycle (approximately
10 s for realtime trends and 60 s for historical trends) plus the
screen refresh cycle (a few seconds). If another screen is
switched to, the changes will be reflected in the screen as soon
as it is returned to.
(c) If the scaling settings have been changed using the CX-Process
Tool, change the tag upper and lower limit settings to match the
changed values using the Detail Button in the Update of Pen In-
formation Dialog Box.
Adding Pens from the Dialog Box
Use the following procedure to assign a tag to a pen for which one is not yet
assigned.
1. Double-click in the area circled in the screen shown below.
Section 4-9