Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 174

Creating Graphic Screens
Pump ( )
Select the direction for
the pump.
Valve ( )
Select the valve type.
Horizontal Up square
Vertical Right square
Left square
The color is changed according to the ON/OFF status of the specified tag.
Setting Method
General Tab
Set the pump colors for when the
specified contact ITEM is ON and OFF.
For details on the Show/Hide Tag Settings Tab and the Flashing Tag Settings
Tab, refer to Common Settings for Graphic Objects in this section.
The color is changed according to the ON/OFF status of the specified tag.
Setting Method
General Tab
Up semicircle
Right semicircle
Set the valve colors for when
the specified contact ITEM is
Left semicircle
ON and OFF.
For details on the Show/Hide Tag Settings Tab and the Flashing Tag Settings
Tab, refer to Common Settings for Graphic Objects in this section.
Section 5-4
Select the tag name
for the function
block.
Select the function block
ITEM for the above tag.
Select the tag name
for the function
block.
Select the function block
ITEM for the above tag.
159