Screen Outlines - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

CX-Process Monitor Plus
1-1-2

Screen Outlines

Overview Screen
4
Data set/monitored
by CX-Process
Monitor Plus
Function block data Control Blocks:
Basic PID (Block Model 011), Advanced PID (Block Model
012), Blended PID (Block Model 013), Batch Flowrate Cap-
ture (Block Model 014), Indication and Setting (Block Model
031), Indication and Operation (Block Model 032), Ratio
Setting (Block Model 033), Indicator (Block Model 034), 2-
position ON/OFF (Block Model 001), and 3-position ON/
OFF (Block Model 002)
Operation Blocks:
High/Low Alarm (Block Model 111), Segment Program 2
(Block Model 157), ON/OFF Valve Manipulator (Block
Model 221), Motor Manipulator (Block Model 222), Revers-
ible Motor Manipulator (Block Model 223), Motor Opening
Manipulator (Block Model 224), Timer (Block Model 205)
and Counter (Block Model 208)
Contact signals Contact signals through Contact Distributor (Block Model
201) + Internal Switch (Block Model 209)
Analog Sent to Analog signals through Input Selector (Block Model 162)
signals Monitor Plus
Set from Analog signals through Constant Generator (Block Model
Monitor Plus 166)
Possesses the functions of all menu screens and alarm display screens.
Loop Control Unit
Section 1-1
Loop Control Board