Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 33

CX-Process Monitor Plus
Item
Online User Config-
operation uration
functions screen
18
Batch Trend The analog signals output from each function block tag ITEM are collected at
Screen fixed intervals when tag data conditions are satisfied, and the data is automati-
cally saved. Data can be displayed in combination with past data.
Data collection
Data display
Segment Displays PV trends for Segment Program 2 (Block Model 157) set values. Seg-
Program 2 ments can be set in table format while observing a time axis graph.
Screen
Data collection
Data display
Descriptions
Four hours or ten days of
data is saved at 1-second
or 1-minute intervals for up
to 960 tags.
Horizontal (time) axis: The following time units can be
scrolled.
1, 2, 4, 6, 8, 12, 24, 36, 48, and
72 hours; 7 or 10 days
Vertical (8-point common) axis: Gradation can be
When a display start time is specified, data is displayed
from that time.Display color: Red, yellow, green, blue,
magenta, purple, cyan, white
3, 30, or 180 days of data is
saved at 1-, 10-, or 60-sec-
ond intervals.
Horizontal (time) axis: 2, 4, 8, 12, 24, 72 hour time incre-
ments can be scrolled.
Vertical axis: Gradation can be enlarged by a factor of
1, 2, 5, or 10.
When a display start time is specified, data is displayed
from that time.
Display color: Yellow, light blue, green, purple
Section 1-1
Data can be manually
saved in CSV format by but-
ton operations or automati-
cally saved at the
completion of each batch.
Past data can be automati-
cally saved in binary format.
enlarged by a factor of
1, 2, 5, or 10.
Data can be manually
saved in CSV format by but-
ton operations or automati-
cally saved with each batch
completion.
Past data can be automati-
cally saved in binary format.