Setup Dialog Box - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

Basic Configuration Operations
Note
1,2,3...
5-2-3

Setup Dialog Box

1,2,3...
3. Enter the password, and click the OK Button.
The following dialog box will be displayed.
4. Enter the password once again, and click the OK Button.
If you have forgotten the password or want to change the password, perform
the following operation using the Registry Editor, and after deleting the Pass-
Word key, set the password once again using the above procedure.
1. Click the Start Button, click the Run Button, enter regedt, and then click
the OK Button.
The Registry Editor will start.
2. On the local computer,
WARE\OMRON\CX-Process Monitor Plus\2.00, and then delete the pass-
word.
This section explains the functions of the Setup Dialog Box.
1. In the Main Window, click the Setup Button.
A dialog box will be displayed to input the password. If no password has
been set, the Setup Dialog Box will not be displayed. For details on setting
a password, refer to 5-2-2 Setting Passwords.
2. Enter the password, and click the OK Button.
The Setup Dialog Box will be displayed.
3. Click any button, and then select a function.
select HKEY_LOCAL_MACHINE\SOFT-
Section 5-2
143