Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 189

Creating Graphic Screens
174
Example: Figure (Rectangle with Rounded Corners)
Flashing Tag Settings Tab
Select the tag name for control-
ling the graphic object flashing.
Note: Setting Threshold Values
Contact ITEM (Digital Item):
Select whether the graphic object display is to flash when the tag value is ON
or OFF.
Analog ITEM:
Set the threshold values for starting and stopping the graphic object flashing.
The settings for the threshold values are the same as for showing and hiding
tag settings.
Refer to the description for the Showing or Hiding Tag Settings above.
Select whether the flashing tag settings func-
tion is to be used.
Select the tag ITEM.
Set the condition for the graphic object to flash.
The screen displayed will depend on the tag type (con-
tact ITEM or analog ITEM). (See note.)
Section 5-4