Operation Guide Screens - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

Operation Guide Screens

Element
Target function Control Blocks: PV, SP, and MV only for Basic PID (011), Advanced PID (012), Blended PID (Block
block Model 013), Batch Flowrate Capture (Block Model 014), Indication and Setting (031), Indication and
Operation (032), Ratio Setting (033), Indicator (034), 2-position ON/OFF (001), and 3-position ON/
OFF (002).
Operation Blocks: High/Low Alarm (111), Segment Program 2(157), ON/OFF Valve Manipulator
(221), Motor Manipulator (222), Reversible Motor Manipulator (223), Motor Opening Manipulator
(224), Timer (205), Counter (208)
Contact input signals or contact output signals for all function blocks, or contact value parameters
(Contact Distributor (Block Model 201) + Internal Switch (Block Model 209))
Display Color, sound, and messages displayed when contact is ON.
Setting None

4-14 Operation Guide Screens

Send source Function Block, or ITEM
Operation Guide Screens display messages registered when the contact sig-
nal was turned ON. To display the Operation Guide Message Screen, click the
Operation Guide Button.
When the specified contact (internal switch, etc.) is turned ON, the pre-pre-
pared wide-size character message (54 wide characters) will be displayed
together with the time the contact was turned ON. (When the contact is turned
ON, a red mark will be displayed next to the Operation Guide icon on the
Overview Screen.)
Possible No. of registrations: 1,000 messages max.
Message colors: 16 colors, displayed with sound.
You can display a message with a maximum of 1,000 elements on one
screen.
Section 4-14
125