Setting For Stopping Alarm Sound - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

System Information Settings
CSV File Auto-save
Settings

4-7-1 Setting for Stopping Alarm Sound

Alarm Reset Settings
128
If Set auto-save of CSV file is selected, the following screen will be displayed.
Set the amount of disk space at which to generate an alarm or error when the
drive in which the CSV file is being saved starts becoming full. Setting the values
as megabytes. An alarm or error will be generated when the drive set to save the
CSV file in for Trend Screens reaches the specified level or lower.
The default for an alarm is 10 Mbytes and the default for an error is 1 Mbyte.
The CSV files will still be saved if an alarm occurs, but they will not be saved if an
error occurs.
The CX-Process Monitor does not provide functions to delete or overwrite old
files.
Note Although different drives can be set for the Trend Screens, the error and alarm
settings are used for all of them.
These settings specify whether or not an alarm sound will be produced when
alarms are reset. There are separate settings for process alarms and system
alarms.
• Process Alarms
An alarm message is displayed in the Alarm Log Screen.
Section 4-7