62 Chapter 3: Adding devices to the Matrox 4Sight X motherboard
Important
Removing the Matrox 4Sight X chassis cover
Follow the steps listed below to remove the chassis cover.
❖ Although the Matrox 4Sight XB unit is taller than shown in the following
illustrations, the steps are identical for the Matrox 4Sight XB unit.
1. Unplug the Matrox 4Sight X power cord.
2. Remove the appropriate screws and nuts from the Matrox 4Sight X unit's front
panel (see the following illustration).
Remove
this screw
Front panel
Remove
these nuts
Remove these nuts
Note
that the
Matrox
4SightXB
unit is
taller
Remove
this screw