Motherboard-Only Version; Additional Components - Matrox 4Sight X Installation And Hardware Reference

Table of Contents

Advertisement

26 Chapter 1: Before you begin

Motherboard-only version

If you have purchased the motherboard-only version of Matrox 4Sight X, the
package should contain the following items (note that the Matrox 4Sight XB unit
cannot be ordered in the motherboard-only version):
Standard package item
Motherboard
Matrox 4Sight X software
package
Instructions to receive this
manual: Matrox 4Sight X
installation and hardware
reference
1. The motherboard will include one of the following processors: Intel Celeron 550 or Intel Core 2 Duo T7500 processor.

Additional components

You might have purchased one or more of the following additional Matrox
components to complete the unit:
Additional component
Matrox video cables
Matrox frame grabbers
Details
The Matrox 4Sight X motherboard only
Includes the following:
• An operating system license (if a hard disk drive with an operating system
is ordered).
• Two CDs: A Matrox 4Sight X System Drivers and Utilities CD (containing
drivers, utilities, and applications needed to operate Matrox 4Sight X), and
a Windows XP Embedded Rescue CD.
A sheet that directs you to the Matrox website to download this manual. This
manual can assist you with the setup of the Matrox 4Sight X unit and the
connection of peripheral and internal devices.
Details
The following Matrox video cables allow you to connect video sources to the
different board(s) installed in the integrated unit version of PCI/104-Express
Matrox 4Sight X:
• Matrox HD-44M-18BNC+ cable. This cable is used to interface video
sources to a Matrox Morphis Dual board. This is a 3-foot cable with a
44-pin male connector at one end and 18 BNC female connectors at the
other end. This cable connects to the video input connector on the
external faceplate.
• Matrox DBHD44-TO-8BNC cable. This cable is used to interface video
sources to a Matrox Meteor-II /Multi-Channel frame grabber.
• Matrox DH44-TO-8BNC/O cable. Same as the Matrox DBHD44-TO-8BNC
cable, except that this cable also has open-ended wires to access the
user-defined signals (cable requires customization).
Contact your Matrox sales representative for availability.
1
.

Advertisement

Table of Contents
loading

Table of Contents