Led Display Function - Mitsubishi Electric A1SD75P1-S3 User Manual

13 COMMON FUNCTIONS

13.4 LED display function

The AD75 status, control status of each axis, input/output signal status, etc., can be
confirmed using the LED display on the front of the AD75 main unit.
Monitor the operation condition as required when the AD75 is not operating normally,
etc. (Constant monitoring is possible.)
The details shown below explain about the "LED display function".
(1) LED display position
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(1) LED display position
(2) Display details
(3) Changing the display details
The various types of information are displayed on the "17-segment LED" and
"axis display LED" on the front of the main unit.
The display is changed over by the "mode switch".
The following drawing shows the positions of the "17-segment LED", "axis
display LED", and "mode switch".
AD75P3-S3
A
D75P3- S3
AX1
AX2
AX3
MODE
RS-422
AX1
AX3 AX2
17-segment LED
(17-seg LED)
Axis display LED
Mode switch
13 - 7
MELSEC-A
A1SD75P3-S3
A
1SD75P3-S3
AX1
AX2
AX3
AX1
MODE
RS-422
AX2 AX3
A1SD75P3-S3