Mitsubishi Electric A1SD75P1-S3 User Manual page 109

5 DATA USED FOR POSITIONING CONTROL
[Reference]
Reading the positioning data
(The positioning data designated in the OS memory is
stored in the buffer memory
Set the read origin axis No. in buffer memory
Set the read origin positioning data No. in the OS
memory into buffer memory
Set "1" in the buffer memory
(Request reading)
The positioning data in the OS memory,
designated in and
Cd.4
in the buffer memory
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The outline of reading and writing the positioning data is shown below.
)
Cd.8
.
Cd.4
.
Cd.5
.
Cd.7
is stored
Cd.5
.
Cd.8
<Read completed>
Writing the positioning data
(The positioning data stored in the buffer memory
is written as the positioning data for the No. designated
in the OS memory.)
Not stored
positioning data stored in the buffer
Set the write destination axis No. in buffer memory
Cd.4
.
Set the write designation positioning data No.
in the OS memory into the buffer memory
Set which of the data stored in
into the buffer memory
Set "2" in the buffer memory
(Request writing)
The positioning data stored in buffer memory
is written into the positioning data in the OS memory
having the No. designated with
5 - 15
MELSEC-A
Is the write source
memory ?
Cd.8
Stored
Cd.5
to write
Cd.8
Cd.6 .
Refer to section 5.7.1
"System control data".
.
Cd.7
Cd.8
and
Cd.4 Cd.5
<Write completed>
: User work
: AD75 state
Cd.8
.
.