List Of Configuration Devices - Mitsubishi Electric A1SD75P1-S3 User Manual

2 SYSTEM CONFIGURATION

2.2 List of configuration devices

The positioning system using the AD75 is configured of the following devices.
No. Part name
1 Positioning module
AD75 software
2
package
3 Personal computer
4 Teaching unit
5 Conversion cable
Connection cable
6
(converter)
7 Drive unit
Manual pulse
8
generator
Connection cable
9
(dedicated)
Connection cable
10
(prepared by user)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Type
AD75P1-S3
AD75P2-S3
AD75P3-S3
A1SD75P1-S3
A1SD75P2-S3
A1SD75P3-S3
SW1IVD-AD75P-E DOS/V personal computer software package
SW0D5C-AD75P-E For details, refer to the GX Configurator-AP Operating Manual.
(Prepared by user)
DOS/V personal
computer
Refer to the AD75 Software Package Operating Manual for details.
Unit for setting, monitoring and testing the AD75 parameters and
AD75TU
positioning data.
A1SD75-C01H
Length 30cm Cable for connecting RS-422 cable and A1SD75P -S3.
A1SD75-C01HA
RS-232 cable for connecting AD75 with DOS/V personal computer, and
– RS-232/RS-422 converter. (Prepared by user)
Refer to the AD75 Software Package Operating Manual for details.
– (Prepared by user)
(Prepared by user)
–
Recommended: MR-HDP01 (Mitsubishi Electric)
AD75C20SH For MR-H
AD75C20SJ2 For MR-J2/J2S-A
AD75C20SC For MR-C
Cable for connecting AD75 with drive unit, manual pulse generator or
– machine system input signal. (Prepared by user)
Refer to manual of connected device.
Remarks
75P -S3
No. of control axes
· AD ....... Building block type
· A1SD ... Compact building block type
Cable for connecting AD75 with drive unit, manual
pulse generator or machine system input signal.
2 - 4
MELSEC-A