Using This Manual (2 - Mitsubishi Electric A1SD75P1-S3 User Manual

Using This Manual (2)

Chapter 1 PRODUCT OUTLINE
Chapter 2 SYSTEM CONFIGURATION
Chapter 3 SPECIFICATIONS AND
Chapter 4 INSTALLATION, WIRING AND
Chapter 5 DATA USED FOR
Chapter 6 SEQUENCE PROGRAM USED
Chapter 7 MEMORY CONFIGURATION
* Understand the data process in the AD75 as necessary.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The methods for reading this manual are shown below.
1) → 2) → 3) → 4) → 5) → Test operation → 6) → Actual operation
FUNCTIONS
MAINTENANCE OF THE
PRODUCT
POSITIONING CONTROL
5.1 Types of data
5.2 List of parameters
5.3 List of positioning data
5.4 List of start block data
5.5 List of condition data
5.6 List of monitor data
5.7 List of control data
FOR POSITIONING CONTROL
AND DATA PROCESS
1) Understand the product functions and specifications,
and design the system.
2) Install and wire the product
3) Set the parameters
4) While referring to lists in "SECTION 2" and "Chapter 5",
set the data required for each control
Chapter 8 ZERO POINT RETURN
Chapter 9 MAIN POSITIONING
Chapter 10 ADVANCED
Chapter 11 MANUAL CONTROL
Chapter 12 CONTROL AUXILIARY
Chapter 13 COMMON FUNCTIONS
5) Create a sequence program for control
Chapter 14 TROUBLESHOOTING
6) Remedies for "Errors" and "Warnings"
A - 14
CONTROL
CONTROL
POSITIONING CONTROL
FUNCTIONS