Table of Contents
Advertisement
5 DATA USED FOR POSITIONING CONTROL
Setting item
Cd.22 Manual pulse generator
enable flag
Cd.23 Manual pulse generator 1
pulse input magnification
Cd.24 Zero point return request flag
OFF request
Cd.25 External start valid
Cd.26 Step valid flag
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
Set whether or not to carry out manual pulse generator operation.
•
Set the magnification of the No. of pulses input from the manual pulse generator.
•
When setting value is 0 or less: Processed as "1"
•
When setting value is 101 or more: Processed as "100"
•
When the zero point return request flag is ON, set the request to turn this OFF
forcibly with the sequence program.
•
Set whether external starting is valid.
•
Set whether to carry out step operation.
5 - 116
Setting details
MELSEC-A
Advertisement
Table of Contents
Troubleshooting
