Table of Contents
Advertisement
5 DATA USED FOR POSITIONING CONTROL
5.7 List of control data
5.7.1 System control data
Setting item
Cd.1 Clock data setting (hour)
Cd.2 Clock data setting (minute,
second)
Cd.3 Clock data writing
Cd.4 Target axis*
*
Cd.4 to Cd.8 are data used to transmit the positioning data between the OS memory and buffer memory.
(Refer to section "7.2 Data transmission process".)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
The clock data (hour) from the PLC CPU is set after the AD75 power is turned
ON.
•
The clock data (minute, second) from the PLC CPU is set after the AD75 power
is turned ON.
•
After setting the clock data in Cd.1 and Cd.2 , when setting the data in
Md.5 and Md.6 as the AD75 clock data, set "1".
•
When the setting is completed, the OS sets "0".
•
Set the axis targeted for reading or writing.
5 - 104
Setting details
MELSEC-A
Advertisement
Table of Contents
Troubleshooting
