Table of Contents
Advertisement
12 CONTROL AUXILIARY FUNCTIONS
(3) Control details and setting
PLC CPU
1) Set "8001" to "
2) Set the positioning data No. to the "indirectly specification data" to be started. (In this case, set "1".)
3) Turn ON the start signal.
4) The positioning data set to the "positioning data No. for indirectly specification No. 8001" is started.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following shows the control details and setting when the indirectly
specification data set to the indirectly specification No. 8001 of axis 1 is started.
1
8001
1150
2
1
4500
3
ON
Y10
Cd.11
Positioning start No.".
Fig. 12.42 Indirectly specification function operating procedure (for axis 1)
AD75
Buffer memory
4
Controlled with
the specified
positioning data
Input/output signal
: When making a positioning start at
the scan next to positioning completion,
provide X1 as an interlock to make
a start after Y10 is turned OFF and
X1 then turns OFF.
12 - 84
MELSEC-A
Drive unit
Advertisement
Table of Contents
Troubleshooting
