Led Display - Mitsubishi Electric MELSEC iQ-F Series User Manual

LED display

The following table lists the LED display.
LED display
MS
NS
POWER
RUN
ERROR
P1 SPEED
SD/RD
P2 SPEED
SD/RD
2 SPECIFICATIONS
22
2.4 Part Names
LED color Description
Green, Red Indicates the error status of the EtherNet/IP device.
■LED color: Green
• On: Data communication possible
• Flashing: No parameter setting
• Off: Power failure occurred
■LED color: Red
• On: Moderate error or major error
• Flashing: Minor error
• Off: Power failure occurred
Green, Red Indicates the EtherNet/IP network status.
■LED color: Green
• On: Data communications being performed
• Flashing: Failed to establish connection
• Off: Power failure occurred
■LED color: Red
• Flashing: Connection time out
• Off: Power failure occurred
Green Indicates the power supply status.
• On: Power on
• Off: Power off or module failure
Green Indicates the operating status.
• On: Normal operation
• Off: Error
Red Indicates the module error status.
• On: Minor error or major error
• Flashing: Moderate error or major error
• Off: Normal operation
Green Indicates the transmission speed of P1.
• On: Link-up (100 Mbps)
• Off: Link-up (10 Mbps)
Green Indicates the data sending/receiving status of P1.
• On, Flashing: Data being sent or received
• Off: Data not transmitted or received
Green Indicates the transmission speed of P2
• On: Link-up (100 Mbps)
• Off: Link-up (10 Mbps)
Green Indicates the data sending/receiving status of P2.
• On, Flashing: Data being sent or received
• Off: Data not transmitted or received