List Of Monitor Data; System Monitor Data - Mitsubishi Electric A1SD75P1-S3 User Manual

Positioning module

Table of Contents

5 DATA USED FOR POSITIONING CONTROL

5.6 List of monitor data

Storage item

Md.1 In test mode flag

Md.2 Module name

Md.3 OS type

Md.4 OS version

Md.5 Clock data (hour: minute)

Md.6 Clock data (second: 100 ms)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Whether the mode is the test mode from the peripheral device or not is stored.

When not in test mode : OFF

When in test mode

The AD75 module name is stored.

The AD75 OS type is stored.

(Stored with an 8-character ASCII code.)

The AD75 OS version is stored.

(Stored with a 4-character ASCII code.)

The software clock data created by the system in the AD75 is stored.

This is used to record the history occurrence time.

Note) To utilize the clock data, the correct time must be set from the PLC CPU

with Cd.1 to Cd.3 . If this setting is not made, the clock data will start

counting from "00 hours 00 minutes" when the AD75 power is turned ON.

The software clock data created by the system in the AD75 is stored.

This is used to record the history occurrence time.

Note) To utilize the clock data, the correct time must be set from the PLC CPU

with Cd.1 to Cd.3 . If this setting is not made, the clock data will start

counting from "00 seconds 00 ms" when the AD75 power is turned ON.

Storage details