Omron SYSMAC CS1G Operation Manual page 461

Interface Specifics
Effect on Other Functions
System Parameter
Program Example
JOG Operation
Direction Switch
JOG Operation
Condition
438
Classification
Status Bits Busy
In Servo Lock
No Origin
Axis Operating
Positioning Completed
Positioning Completed (No.2)
Axis Machine Lock Status
Command Disabled/Enabled
Axis Not Used/Used
In Manual/Automatic Mode
Nil
The settings of the following parameters determines the speed pattern:
Parameter No.
P2AA02
P2AA04
P2AA07
P2AA08
P2AA10
P2AA12
x+32 to 63.03
In Servo Lock
Item
Maximum manual feed rate
Manual feed rate
Manual feed acceleration time
Manual feed deceleration time
Manual feed acceleration/deceleration type
Manual feed S-curve time constant
x+32 to 63.15
In Manual Mode
Section 7-4
Effect
JOG cannot be executed when
ON.
JOG cannot be executed when
OFF.
No effect
JOG cannot be executed when
ON.
No effect
No effect
No effect
JOG cannot be executed when
OFF.
JOG cannot be executed when
ON.
JOG cannot be executed when
ON.
Name
x+0 to 31.12
JOG/STEP Operation Direction
x+0 to 31.04
JOG Operation