To Connect The Probe; Figure 4.5 Fuse Replacement - Rigol MSO8000A Series User Manual

Digital oscilloscope

Hide thumbs Also See for MSO8000A Series:

Table of Contents

To avoid electric shock, please ensure that the instrument has been turned off, the power

source has been cut off, and the fuse to be used conforms to the fuse rating.

To Connect the Probe

RIGOL provides the passive probe, the active probe, and the logic probe for the

MSO8000A series. For specific probe models, please refer to

For detailed technical information of the probes, please refer to the corresponding

Probe User Guide.

Connect the passive probe:

1. Connect the BNC terminal of the probe to an analog channel input terminal of the

oscilloscope on the front panel as shown in

2. Connect the ground alligator clip or spring of the probe to the circuit ground

terminal, and then connect the probe tip to the circuit point to be tested.

MSO8000A Datasheet .

Mso8074a Mso8154a Mso8204a