Table of Contents
Advertisement
- All MeasurementPress All Measure, then rotate the multifunction knob
select the desired measurement channel.
You can also press All Measure continuously to select or enable the touch
screen to tap the desired channel. The available measurement channels include
OFF and CH1-CH4.
5. Statistics Reset
When the Quick shortcut key is set to "Stat Reset", press
make statistics reset of measurement or pass/fail test reset.
- Operation type
Press Operation and then rotate the multifunction knob
Reset". Press down the knob
continuously or enable the touch screen to select the type.
- Statistics Reset
Press Stat Reset and then rotate the multifunction knob
function that requires statistics reset. Press down the knob to select it. You can
also press Stat Reset continuously to select among the options, or enable the
touch screen to tap the desired option. You can select "Measure" or "PassFail".
6. Print
When the Quick shortcut key is set to "Print", press
the screen image of the oscilloscope.
Press Operation and then rotate the multifunction knob
down the knob
enable the touch screen to select the type.
7. Email
When the Quick shortcut key is set to "Email", press
the file through email.
Press Operation and then rotate the multifunction knob
down the knob
enable the touch screen to select the type.
8. Record
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to select it. You can also press Operation
to select it. You can also press Operation continuously or
to select it. You can also press Operation continuously or
System Utility Function Setting
on the front panel to
to select "Stat
to select the
on the front panel to print
to select "Print". Press
on the front panel to send
to select "Email". Press
to
373
Advertisement
Table of Contents
