Table of Contents
Advertisement
•
AX: indicates the X value at Cursor A.
•
AY: indicates the Y value at Cursor A.
•
BX: indicates the X value at Cursor B.
•
BY: indicates the Y value at Cursor B.
•
ΔX: indicates the horizontal spacing between Cursor A and Cursor B.
•
ΔY: indicates the vertical spacing between Cursor A and Cursor B.
1. Adjust the Cursor Position
- Press AX, then rotate the multifunction knob
A.
- Press BX, then rotate the multifunction knob
B.
- Press AY, then rotate the multifunction knob
A.
- Press BY, then rotate the multifunction knob
B
- Press More > ABX, then rotate the multifunction knob
at Cursor A and Cursor B simultaneously.
- Press More > ABY, then rotate the multifunction knob
at at Cursor A and Cursor B simultaneously.
During the adjustment, the measurement results will change accordingly. The
adjustable range is limited within the screen.
NOTE
If you select either of the items (ABX and ABY), you can press down the multifunction knob
continuously to switch between them.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Operations and Measurements
to adjust the X value at Cursor
to adjust the X value at Cursor
to adjust the Y value at Cursor
to adjust the Y value at Cursor
to adjust the X values
to adjust the Y values
197
Advertisement
Table of Contents
