Table of Contents
Advertisement
22.6.5
To Rename a File or Folder
1. Press
memory or external memory. Press down the knob to open it.
2. Rotate the multifunction knob
3. Press Rename, and then the filename input interface is displayed. For the filename
input method, refer to descriptions in "
TIP
The touch screen function only allows you to select the folder and open it. You are unable to
rename the folder with the touch screen operation.
22.6.6
To Clear the Internal Memory Safely
1. Press
memory "Local Disk(C)". Press down the knob to open it.
2. Press SecurityClear, and then a prompt message for confirming security clear is
displayed.
3. Press OK to clear all the saved files from the internal disk.
22.7
Factory Settings
Press
is displayed. Press OK or tap OK to restore the instrument to its factory default
settings, as shown in the table below.
Table 22.4 Factory Settings
Parameter
Horizontal
Horizontal Time Base 1 μs
Horizontal Position
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
> Disk, and rotate the multifunction knob
to select the file to be renamed.
> Disk, and rotate the multifunction knob
on the front panel, then a prompt message "Restore default settings?"
Factory Settings
0 s
to select the internal
To Create a Folder
".
to select the internal
Store and Load
339
Advertisement
Table of Contents
