Table of Contents
Advertisement
Function/Arbitrary Waveform Generator (Option)
Press Region continuously to select to load the waveforms in the "Cursor" or
"Screen" region. When "Cursor" is selected, press Cursor A or Cursor B and
rotate the multifunction knob
respectively; or press Cursor AB and rotate the multifunction knob
the positions of cursors A at the same time to determine the waveform range.
- Load
Press Load to load the set channel signal.
2. Load the Waveform
Press Load Stored to enter the waveform loading interface. You can select the
stored waveforms from the internal memory or the external memory. The
waveform file is suffixed with "*.arb". Then, press Load to load the selected
waveform. For details, refer to descriptions in "
21.2.2
To Create the Waveforms
You can create arbitrary waveforms according to your needs. Press Create to enter
the waveform creation menu. Meanwhile, the waveform editor is displayed on the
screen.
•
Set the frequency or period
First press Frequency or Period, rotate the multifunction knob
"Frequency" or "Period". You can also press Frequency or Period continuously or
enable the touch screen to select it. Rotate the multifunction knob
pop-up numeric keypad to set the frequency or period of the current signal.
•
Set the amplitude or high level
First press Amplitude or High Level, then rotate the multifunction knob
select "Amplitude" or "High Level". You can also press Amplitude or High Level
continuously to select it. Enable the touch screen to select it. Rotate the
multifunction knob
or high level of the current signal. Note that if you select "Amplitude" for this
menu, then the menu below Amplitude is automatically turns out to be "Offset";
if you select "High Level" for this menu, then the menu below High Level is
automatically turns out to be "Low Level".
•
Set the offset or low level
First press Offset or Low Level, then rotate the multifunction knob
"Offset" or "Low Level". You can also press Offset or Low Level continuously to
select it. Enable the touch screen to select it. Rotate the multifunction knob
use the pop-up numeric keypad to set the offset or low level of the current
signal.
312
to adjust the positions of the two cursors
Store and Load
or use the pop-up numeric keypad to set the amplitude
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to adjust
".
to select
or use the
to
to select
or
Advertisement
Table of Contents
