Table of Contents
Advertisement
Quick Start
4.6.3
Wave
•
operation function. The math operations include A+B, A-B, A×B, A/B, FFT, and
etc. Besides, you can also set the math operation label.
•
control menu. You can enable or disable any channel or channel group, modify
the waveform sizes of the digital channel, modify the threshold of the digital
channel, and group the 16 digital channels. Besides, you can also set a label for
each digital channel.
•
waveform setting menu. You can compare the actually measured waveform with
the reference waveform to locate the circuit failure.
•
and then you can set the decode options. This series of oscilloscope supports
the parallel decoding and many protocol decodings. (For details, refer to the
descriptions in "
•
Wave Vertical
Rotate the knob to adjust the vertical position of the current digital channel
waveform, the vertical position of the math operation waveform, the vertical
28
: indicates the math operation key. Press this key to enable the math
: indicates the logic analyzer key. Press this key to open the logic analyzer
: indicates the reference waveform key. Press this key to open the reference
: indicates the decode key. Press this key to open the decode setting menu,
Protocol Decoding
POSITION: indicates the waveform vertical position knob.
").
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Advertisement
Table of Contents
