Table of Contents
Advertisement
WARNING
To avoid electric shock, ensure that the instrument is correctly grounded.
7.3
Turn-on Checkout
When the oscilloscope is connected to power, press the Power key at the lower-left
corner of the front panel to start the oscilloscope. (You can also press
> Power status, and select "Switch On". After the instrument is connected to power
source, it will start directly.) You can also enable the touch screen to perform the
above operations.) During the start-up process, all the backlights of the front-panel
keys are illuminated for a few seconds. The oscilloscope starts to perform a series of
self-tests. After the self-test, the splash screen is displayed.
NOTE
Restart and Shutdown:
1. Enable the touch screen and then tap the function navigation icon
corner of the touch screen to enable the function navigation.
2. Tap the "Restart" icon, and then you can select "Restart" or "Shutdown", as shown in the
figure below.
3. If you tap "Restart"
If you tap "Shutdown"
at the lower-left corner of the front panel to turn off the oscilloscope).
7.4
To Set the System Language
MSO8000A series digital oscilloscope supports multiple system languages. You can
press
7.5
To Connect the Probe
RIGOL provides the passive probe, the active probe, and the logic probe for the
MSO8000A series. For specific probe models, please refer to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
, the oscilloscope powers off and then automatically restarts again.
, the oscilloscope powers off (you can also press the Power key
> Language to set the system language.
To Prepare for Use
> System
at the lower-left
MSO8000A Datasheet .
11
Advertisement
Table of Contents
