Table of Contents
Advertisement
- Set the view type: Press View, rotate the multifunction knob
- Export: If you select "Packets", you can export time and the corresponding
- Jump to: Set the operating status of the oscilloscope to "STOP". Then, select
- Decode: The setting of this menu enables you to quickly view the
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
press down the knob to select it. You can also press Format continuously or
enable the touch screen to select it. The available formats include Hex, Dec,
Bin, and ASC.
form of the event table to be viewed. Then, press down the knob to select it.
You can also press View continuously or enable the touch screen to select it.
The available choices include "Packets", "Details", and "Payload". You can
also tap "Packets", "Details", or "Payload" at the top of the event table to
select it.
If you select "Packets", the decoded data (Tx and/or Rx), time, and error
information (Tx and/or Rx) are displayed in the event table. If you select
"Details", the detailed data in the specified row will be displayed in the event
table. If "..." appears in the row of data, it indicates that the decoded data are
not fully displayed. At this time, you can view the details in the "Packets"
view. If you select "Payload", all data in the specified column will be
displayed in the event table. If "..." appears in the specified column of data, it
indicates that the decoded data are not fully displayed. At this time, you can
view the details in the "Packets" view.
decoded data. Press Export, then the save setting interface is displayed. You
can export the data table of the packet to the internal memory or the
external USB storage device (when detected) in CSV format. For detailed
saving operation, refer to descriptions in "
the data of the specified time from the event table. Press Jump to and the
specified data waveforms are displayed in the center of the screen.
corresponding event tables of four decode modules (Decode1, Decode2,
Decode3, and Decode4). Press Decode, then use the multifunction knob
to select a decode module, then press down the knob to select it. You can
also press Decode continuously or enable the touch screen to select it.
Protocol Decoding
to select the
Store and Load
".
241
Advertisement
Table of Contents
