Rigol MSO8000A Series User Manual page 52

Quick Start
21. CH2 Status Label
- Displays the status of CH2.
- Displays the vertical scale of CH2. That is, the voltage value per grid of CH2 in
the vertical axis. Displays the offset of CH2, i.g. the vertical offset of CH2
waveform.
- Different labels will be displayed according to the current channel setting. For
example,if you select "DC" for channel coupling,
the bandwidth limit,
displayed.
22. CH1 Status Label
- Displays the on/off status of CH1.
- Displays the vertical scale of CH1. That is, the voltage value per grid of CH1 in
the vertical axis.
- Displays the offset of CH1, i.g. the vertical offset of CH1 waveform.
- Different labels will be displayed according to the current channel setting. For
example,if you select "DC" for channel coupling,
the bandwidth limit,
displayed.
23. Digital Channel Label/Waveform
The logic high and low level of the digital waveform are displayed in green. Its
edge is displayed in white. The color of the currently selected waveform of the
digital channel is consistent with that of the channel label, being displayed in red.
The grouping setting function under the logic analyzer function menu can divide
the digital channels into 4 channel groups. The channel label of the same channel
group is displayed in the same color; different channel groups are marked with
different colors.
24. Function Navigation
Enable the touch screen and then tap this icon to enable the function navigation.
36
is displayed; if you select "50 Ω" for impedance,
is displayed; if you select "50 Ω" for impedance,
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
is displayed; if you enable
is
is displayed; if you enable
is