-
-
•
Upper/Lower Limit Setting
Press Upper, then rotate the multifunction knob
keypad to set the upper limit of the voltage.
Press Lower, then rotate the multifunction knob
keypad to set the lower limit of the voltage.
10.2
Frequency Counter
The frequency counter analysis function provides frequency, period, or edge event
counter measurements on any analog channel.
Press
enable the touch screen and then tap the function navigation icon
left corner of the screen to open the function navigation. Then, tap the "Counter" icon
to open the frequency counter setting menu. You can also directly press
Counter on the front panel to enter the frequency counter setting menu. In addition,
You can also press
rotate the multifunction knob
open the frequency counter setting menu.
10.2.1
To Enable or Disable the Frequency Counter
In the "Counter" setting menu, press Counter continuously to enable or disable the
frequency counter measurement. When enabled, the following figure is displayed.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
In Limits: when the voltage value is within the limits, you can enable or
disable the beeper to sound an alarm.
Out Limits: when the voltage value is outside of the limits, you can enable
or disable the beeper to sound an alarm.
> Analyze > Counter to open the Frequency Counter setting menu, or
> Add, then in the displayed measurement category area,
Source Measurement Item Value
Digital Voltmeter (DVM) and Frequency Counter
or use the pop-up numeric
to select "Analyze", and then select "Counter" to
or use the pop-up numeric
at the lower-
>
201