21.1.9
Exp.Fall
Press Wave, then use the multifunction knob
down the knob to select the waveform. You can also press Wave continuously or
enable the touch screen to select it. At this time, you can set the parameters for the
Exp.Fall waveform (as shown in the figure below). For setting methods, refer to
descriptions in "
21.1.10
ECG
Press Wave, then use the multifunction knob
the knob to select the waveform. You can also press Wave continuously or enable the
touch screen to select it. At this time, you can set the parameters for the ECG
waveform (as shown in the figure below). For setting methods, refer to descriptions in
To Output Sine
"
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Function/Arbitrary Waveform Generator (Option)
To Output Sine
".
Figure 21.5 Exp.Fall
".
to select "Exp.Fall" and then press
to select "ECG" and then press down
307