Table of Contents
Advertisement
Auto Measurement
the "
cursor measurement function provides the following two cursors.
Y Cursor
Y Cursor
(Cursor A)
(Cursor A)
Y Cursor
Y Cursor
(Cursor B)
(Cursor B)
•
X Cursor
X cursor is a vertical solid/dotted line that is used to make horizontal
adjustments. It can be used to measure time (s), frequency (Hz), phase (°), and
ratio (%).
-
-
•
Y Cursor
Y cursor is a horizontal solid/dotted line that is used to make vertical
adjustment. It can be used to measure amplitude (the unit is the same as that of
the source channel amplitude) and ratio (%).
-
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
" function can be measured with cursor measurement. The
X Cursor (Cursor A)
X Cursor (Cursor A)
Cursor A is a vertical solid line (
and Cursor B is a vertical dotted line (
screen).
In the X-Y cursor mode, X cursor is used to measure the waveform
amplitude of CH1.
Cursor A is a horizontal solid line (
screen), and Cursor B is a horizontal dotted line (
bottom of the screen).
Operations and Measurements
X Cursor (Cursor B)
X Cursor (Cursor B)
is displayed at the bottom of the screen),
is displayed at the bottom of the
is displayed at the bottom of the
is displayed at the
187
Advertisement
Table of Contents
