Table of Contents
Advertisement
Operations and Measurements
4. Falling Edge Count: The number of falling edges that fall from above the
threshold upper limit to below the threshold lower limit.
NOTE
•
The above measurement items are only available for the analog channels.
•
The default values for threshold upper limit and threshold low limit are 90% and 10%,
respectively. You can press
Delay and Phase Parameters
Source A
Source B
176
1
2
1
> Setting to enter the sub-menu to set the parameters.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n
Falling Edge Count = n
2
n
Period
Delay
Rising Edge Count = n
Threshold
Upper Limit
Threshold
Lower Limit
Threshold
Upper Limit
Threshold
Lower Limit
Advertisement
Table of Contents
