Table of Contents
Advertisement
•
Group:
For grouping, the operations for the four user-defined groups (Group1, Group2,
Group3, and Group4) are the same. Here take Group1 as an example.
Press Group1 to open the D0-D15 channel selection list (the status icon is
located at the left side of each channel). Rotate the multifunction knob
press Group1 continuously to select the channel(s) to be added to Group1.
Then, press down the multifunction knob
Group1. The channel(s) that has/have been added to Group1 is/are marked with
the status icon
is/are marked with the status icon
Use the same method to group the other channels. Each channel can only be
added to one single group, and the channels that have been add to other group
cannot be selected. You can perform group operation on 16 digital channels
(D0-D15).
•
Ungroup:
Press UnGroup to open the list. Rotate the multifunction knob
UnGroup continuously to select any channel group, then press down the knob
to ungroup the channels.
NOTE
-
-
14.8
Waveform Color of the Digital Channel
When the digital channel is enabled, its corresponding waveforms and label are
displayed on the screen. This oscilloscope supports setting the display color of the
high logic level, low logic level, and edges.
Press More > Color to enter the waveform color setting menu.
•
Press High, and rotate the multifunction knob
high logic level. Press down the knob to select the color. You can also press High
continuously or enable the touch screen to select it.
•
Press Edge, and rotate the multifunction knob
down the knob to select it. You can also press Edge continuously or enable the
touch screen to select it.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
, and the channel(s) that has/have not been added to Group1
You can only ungroup the digital channels.
If no group is set, the UnGroup menu and the Group On/Off menu are grayed out
and disabled.
to add the selected channel(s) to
.
to set the display color of the
to set the edge color. Press
Digital Channel
or
or press
227
Advertisement
Table of Contents
