Table of Contents
Advertisement
Histogram Analysis
In the "Histogram" setting menu, press Enable continuously to enable or disable the
histogram analysis function.
TIP
To record peaks or glitches in the histogram data, please always enable the histogram function.
12.2
To Select the Histogram Type
The histogram includes the following three types:
•
Horizontal: displays the number of times for statistics making in the forms of
columns in the histogram bar graph at the bottom of the graticule.
•
Vertical: displays the number of times for statistics making in the forms of rows
in the histogram bar graph at the left of the graticule.
•
Measure: displays the number of times for statistics of the measurement results
in the forms of columns in the histogram bar graph at the bottom of the
graticule.
Press Type, then rotate the multifunction knob
type, and then press down the knob to select the type. You can also press Type
continuously or enable the touch screen to select the type.
12.3
To Select the Histogram Source
If "Horizontal" or "Vertical" is selected under Type, you need to set the source (CH1-
CH4). Press Source, then use the multifunction knob
and then press down the knob to select the source. You can also press Source
continuously or enable the touch screen to select it.
12.4
To Set the Measurement Items
When you select "Measure" as the histogram type, press Measure > Add on the front
panel or tap the auto measurement label "MEASURE" at the top of the screen to enter
the measurement setting menu, and then add one or multiple measurement items. At
this time, the added measurement item(s) can be served as the measurement
histogram source(s) and displayed in the Item menu.
210
to select the desired histogram
to select the desired source,
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Advertisement
Table of Contents
