Table of Contents
Advertisement
Operations and Measurements
•
Press Scale to set the vertical scale of the operation results. For setting methods,
refer to the descriptions in "
rotate Wave Vertical
Scale.
•
Press More > AutoSetting to adjust the vertical scale and offset of the
operation results to an optimal value based on the current configuration, so as
to better observe.
•
Press More > Invert to enable or disable the inverted display function of the
waveform.
•
Press More > Expand to expand or compress waveform around the "Center" or
"GND".
•
Press More > Label to set the label for math operation results. For details, refer
to descriptions in "
•
Press More > Color Grade to enable or disable the color grade display of the
operation results. When enabled, different colors are displayed on the screen to
indicate the times of data acquisition or acquisition probability.
•
Press More > Reset ColorGrade to clear the color grade display and display the
color grade again.
9.1.23
Math Operation Label
Press Label to enter the label setting menu.
•
Press Display continuously to enable or disable the label display of the
waveform. If it is enabled, the label will be displayed at the left side of the
waveform.
•
Press Library to select the preset waveform label, including ADD, SUB, MUL, DIV,
FFT, AND, OR, XOR, NOT, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, LPas, HPas, BPas, Bstop,
and AX+B.
•
Press Label, and the label editing interface is automatically displayed. You can
input the label manually. For details, refer to descriptions in "
170
Parameter Setting Method
SCALE or enable the touch screen to adjust the vertical
Math Operation Label
".
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
". You can also directly
Channel Label
".
Advertisement
Table of Contents
