Table of Contents
Advertisement
•
Set the initial points
The initial number of points indicates the number of editable points. By default,
the number of editable points of arbitrary waveforms created can be preset to 2.
Point 1 is fixed at 0 s and Point 2 is fixed at the middle of the period. Press Init
Points, then rotate the multifunction knob
the number of editable points for the arbitrary waveform. The arbitrary
waveform can contain up to 16,384 (16 kpts) points.
•
Linear interpolation
Press Linear Interp continuously to enable or disable the linear interpolation
between the defined points of the waveform.
-
-
•
Edit points
Press Edit Points to enter the point editing menu. You can specify a voltage
value for each waveform point to define the waveforms.
-
-
-
-
-
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
ON: the waveform editor connects two points using a straight line.
OFF: the waveform editor will keep a constant voltage level between two
points and create a ladder-like waveform.
Current Point
Press PointX, then rotate the multifunction knob
keypad to select the points to be edited. The available range is from 1 to
the number of initial points.
Voltage
Press Voltage, then rotate the multifunction knob
keypad to set the voltage value of the current point. Its available range is
from -2.5 V to +2.5 V.
Insert
Press Insert to insert a new editable point between the current point and
the next point. The number of initial points adds 1 automatically. You can
press Insert continuously to increase the editable points gradually.
Delete
Press Delete to delete the current point from the waveform, and connect
the remaining points using the current interpolation mode.
NOTE
Zoom
Function/Arbitrary Waveform Generator (Option)
or use the numeric keypad to set
or use the numeric
or use the numeric
313
Advertisement
Table of Contents
