Table of Contents
Advertisement
19
Search and Navigation Function
The search function allows you to search for relevant events based on the search
condition that you set. The navigation function includes the recording&playing
navigation, time navigation, and event navigation.
19.1
Search Function
The search function enables you to search the Edge trigger, Pulse trigger, Runt trigger,
Slope trigger, RS232 trigger, I2C trigger, or SPI trigger. Press
to enable the search setting menu. You can also enable the touch screen and then tap
the function navigation icon
function navigation. Then, tap the "Search" icon to open the search setting menu.
1. Enable or Disable the Search Function
Press Search continuously to enable or disable the search function.
2. Select the Search Type and Set the Parameters
Press Type, and rotate the multifunction knob
Pulse, Runt, Slope, RS232, I2C, or Slope). You can also press Type continuously or
enable the touch screen to select it.
- Edge search: sets the search type to "Edge". For Edge Setup menu settings,
refer to descriptions in "
setting menu. Rotate the multifunction knob
keypad to set the threshold.
- Pulse trigger search: sets the search type to "Pulse". For Pulse Setup menu
settings, refer to descriptions in "
threshold setting menu. Rotate the multifunction knob
numeric keypad to set the threshold.
- Runt search: sets the search type to "Runt". For Runt Setup menu settings,
refer to descriptions in "
setting menu. Rotate the multifunction knob
keypad to set Threshold A and Threshold B.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
at the lower-left corner of the screen to open the
to select the desired type (Edge,
Edge Trigger
". Press Threshold to enter the threshold
Pulse Trigger
". Press Threshold to enter the
Runt Trigger
". Press Threshold to enter the threshold
Search and Navigation Function
on the front panel
or use the pop-up numeric
or use the pop-up
or use the pop-up numeric
293
Advertisement
Table of Contents
