Table of Contents
Advertisement
Protocol Decoding
- Press CS, then rotate the multifunction knob
- Press CS Polarity continuously to select Positive
- When you select the analog channel (CH1-CH4) as the CS channel, press
4. Set the Source
Press Sources to enter the signal setting menu.
- Set the CLK
- Press CLK, then rotate the multifunction knob
- When you select the analog channel (CH1-CH4), press Threshold below CLK,
- Press Slope to set the instrument to sample MISO and MOSI on the rising
- Set MISO and MOSI
- Press MISO, then rotate the multifunction knob
250
channel, and then press down the knob to select it. You can also press CS
continuously or enable the touch screen to select it. The analog channel
(CH1-CH4) or digital channel (D0-D15) can all be selected as the CS channel.
the polarity for CS channel.
Threshold, then rotate the multifunction knob
numeric keypad to set the threshold.
of the clock channel, and then press down the knob to select it. You can also
press CLK continuously or enable the touch screen to select it. The analog
channel (CH1-CH4) or digital channel (D0-D15) can all be selected.
then rotate the multifunction knob
threshold of the clock channel.
edge (
) or the falling edge (
channel, and then press down the knob to select it. You can also press MISO
continuously or enable the touch screen to select it. The available channels
include OFF, analog channels (CH1-CH4), and digital channels (D0-D15).
When you select the analog channel (CH1-CH4), press Threshold below
to select the desired
or use the numeric keypad to set the
) of CLK.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
or Negative
as
or use the pop-up
to select the desired source
to select the MISO data
Advertisement
Table of Contents
