Table of Contents
Advertisement
Quick Start
- When CH1-CH4 or EXT is selected as the trigger source, you need to set a
proper trigger level.
- When D0-D15 is selected as the trigger source, you need to set a proper
threshold level.
- The trigger level label
trigger level/threshold level value is displayed at the upper-right corner of the
screen.
- When you use Trigger
trigger level/threshold level value will change with the up and down of
13. Operation Menu
Press any softkey on the front panel to activate the corresponding menu.
14. Notification Area
Displays the beeper icon, the USB storage device icon, time, and the LAN
connection icon.
- Sound icon: Press
is turned on,
- USB storage device icon: When a USB storage device is detected,
displayed.
- Time: displays the system time. For the system time setting, refer to
descriptions in "
- LAN connection icon: When the LAN interface is successfully connected,
will be displayed.
15. AWG 2
- Displays the on/off status of AWG 2.
- Displays the waveform type set for the current AWG 2.
- It is only available for the model installed with the MSO8000-AWG option.
34
is displayed at the left section of the screen, and the
LEVEL to modify the trigger level/threshold level, the
> Sound to turn on or off the sound. When the sound
will be displayed; when off,
System Time
".
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
will be displayed.
will be
.
Advertisement
Table of Contents
