Function/Arbitrary Waveform Generator (Option)
Figure 21.7 Gauss
21.1.12
Lorentz
Press Wave, then use the multifunction knob
to select "Lorentz", and then press
down the knob to select the waveform. You can also press Wave continuously or
enable the touch screen to select it. At this time, you can set the parameters for the
Lorentz waveform (as shown in the figure below). For setting methods, refer to
To Output Sine
descriptions in "
".
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
309