Table of Contents
Advertisement
Quick Start
a. Confirm that the option license file is located in the root directory of the USB
b. The Option install key is activated, and press this menu key to start installing
c. After installation, a prompt message "Option activated successfully" is
TIP
•
Only 1 option license file of one instrument is allowed to be stored in the same USB
storage device, but the USB storage device can store the option license file of several
different instruments. You are not allowed to modify the licensed filename.
•
During the installation process, you are not allowed to power off the instrument or pull
out the USB storage device.
•
Sending the SCPI commands (:SYSTem:OPTion:INSTall <license>) to install options is
supported. Installing options by inputting the license code manually is not supported.
46
storage device, and connect the USB storage device to the oscilloscope
properly.
the option.
displayed.
NOTE
After the option has been installed, you are recommended to restart the instrument.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Advertisement
Table of Contents
