Lg (Base 10 Exponential) - Rigol MSO8000A Series User Manual

NOTE
The source of Math2 can be CH1-CH4, Ref1-Ref10, or Math1; the source of Math3 can be
CH1-CH4, Ref1-Ref10, Math1, or Math2; the source of Math4 can be CH1-CH4, Ref1-
Ref10, Math1, Math2, or Math3; only the channels that have been enabled currently can
be selected.
• Press Offset to set the vertical offset of the operation results. For setting
methods, refer to the descriptions in "
directly rotate Wave Vertical
the vertical offset.
• Press Scale to set the vertical scale of the operation results. For setting methods,
refer to the descriptions in "
rotate Wave Vertical
Scale.
• Press AutoSetting to adjust the vertical scale and offset of the operation results
to an optimal value based on the current configuration, so as to better observe.
• Press More > Invert to enable or disable the inverted display function of the
waveform.
• Press More > Label to set the label for math operation results. For details, refer
to descriptions in "
• Press More > Color Grade to enable or disable the color grade display of the
operation results. When enabled, different colors are displayed on the screen to
indicate the times of data acquisition or acquisition probability.
• Press More > Reset ColorGrade to clear the color grade display and display the
color grade again.
9.1.13

Lg (Base 10 Exponential)

Calculates the base 10 exponential of the selected source point by point and displays
the results.
Press
• Press Operation continuously to enable or disable the "Lg" operation function.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Parameter Setting Method
SCALE or enable the touch screen to adjust the vertical
Math Operation Label
> Math1 > Operator to "Lg":
Operations and Measurements
Parameter Setting Method
POSITION or enable the touch screen to adjust
". You can also directly
".
". You can also
157