Table of Contents
Advertisement
Protocol Decoding
- Set the event table format: Press Format, rotate the multifunction knob
- Set the view type: Press View, rotate the multifunction knob
- Export: If you select "Packets", you can export time and the corresponding
- Jump to: Set the operating status of the oscilloscope to "STOP". Then, select
- Decode: The setting of this menu enables you to quickly view the
278
-
The displayed decoded data information in the bus is related to the value of the
horizontal time base. Reducing the horizontal time base can help you view the
detailed information.
to select the display format of the decoded data. Then, press down the knob
to select it. You can also press Format continuously or enable the touch
screen to select it. The available formats include Hex, Dec, Bin, and ASC.
form of the event table to be viewed. Then, press down the knob to select it.
You can also press View continuously or enable the touch screen to select it.
The available choices include "Packets", "Details", and "Payload". You can
also tap "Packets", "Details", or "Payload" at the top of the event table to
select it.
If you select "Packets", the decoded data, time, and other information are
displayed in the event table. If you select "Details", the detailed data in the
specified row will be displayed in the event table. If "..." appears in the row of
data, it indicates that the decoded data are not fully displayed. At this time,
you can view the details in the "Packets" view. If you select "Payload", all data
in the specified column will be displayed in the event table. If "..." appears in
the specified column of data, it indicates that the decoded data are not fully
displayed. At this time, you can view the details in the "Packets" view.
decoded data. Press Export, then the save setting interface is displayed. You
can export the data table of the packet to the internal memory or the
external USB storage device (when detected) in CSV format. For detailed
saving operation, refer to descriptions in "
the data of the specified time from the event table. Press Jump to and the
specified data waveforms are displayed in the center of the screen.
corresponding event tables of four decode modules (Decode1, Decode2,
Decode3, and Decode4). Press Decode, then use the multifunction knob
Store and Load
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to select the
".
Advertisement
Table of Contents
