Table of Contents
Advertisement
7. Error Expressions in Decoding
In LIN decoding, the parity error, checksum error, or sync error may occur.
- Parity error
If the parity error is detected, frame ID and parity bit (when the signal is set to
include the parity bit) will be displayed in red, as shown in the figure below.
- Checksum error
If the checksum error is detected, CRC is displayed in red, as shown in the figure
below.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Parity Error
Protocol Decoding
259
Advertisement
Table of Contents
